6
EN
•
Place the sensor around your home as required using the included double-sided tape. Also includ-
ed is an optional adjustable mount to allow for flexible positioning around tight spaces.
•
Make sure the sensor location has strong, reliable Wi-Fi reception available so you can get timely
alerts. As a general rule, the nearer your sensor is to your Wi-Fi router, the better the wireless con
-
nection quality. You can expand the Wi-Fi coverage of your current network by installing a Wi-Fi
range extender.
•
To prevent false detection, avoid aiming the sensor at heat sources (fireplaces, air conditioners,
hot air vents, etc), at windows where sunlight can be reflected or placing it in direct sunlight. Also,
do not install the sensor on surfaces that can move or vibrate.
•
For best results, the sensor should ideally be installed pointing downwards at an angle where
movement is across the detection area of the sensor. Motion detection is less effective when
movement is directly towards or away from the front of the sensor.
•
For reliable bonding, clean the mounting surface with an alcohol/cleaning wipe, and let dry. Do not
use on rough surfaces. When mounting the sensor/adjustable mount, press firmly to the surface
for 60 seconds to ensure proper adhesion.
•
To test the sensor, walk across the detection area. The app will send you
a push notification, for example, “
Motion Detected on Hallway
”, when
the sensor detects motion. The sensor tile will also automatically update
its status in the app, as shown on the right. To conserve battery power,
the sensor will enter sleep mode for 3 minutes each time after it detects
motion. During this period, the sensor will not detect any motion activity.
Note: You can use the Modes feature in the app to configure whether or not to receive “Motion
Alert” push notifications when the sensor is in Home, Away or Night mode.
MOUNTING THE SENSOR
