Swann WARMNITE WN43008N, Руководство пользователя

Страница: 9 / 12

9 www.warmnite.co
USING YOUR APPLIANCE
• Ensure the blanket is fitted to the bed
correctly. Refer to the diagram in the
Fitting Instructions section for more
information.
• Plug the power lead into the closest
socket. Avoid stretching the power cable.
Do not coil or fold the power cable.
Preheating The Bed:
The electric blanket is designed with pre-
heating in mind but can be used through the
night on a low heat.
• Connect the controller to the blanket.
Simply hold the socket with one hand and
push the controller plug all the way until
the locking tab locates over the plug on
top of the controller.
• Move the heat setting on the control
switch to heat level 2 or 3, depending on
the level of the heat required.
• Allow approximately 60-90 minutes for
the blanket to heat the bed thoroughly,
although this time may vary depending
on the room temperature and type of
bedding used.
• In cold weather, all electric blankets
will take longer to heat the bed to a
comfortable temperature. Please allow
for this.
All Night Use:
Note:
This electric blanket is safe to be used all
throughout the night. When using the blanket
for this purpose, choose heat level 1 on the
controller.
This setting will provide safe and comfortable
heat to sleep on all night. This setting can be
used to air the bed.
WARNING: Always ensure that the slider
switch is moved to the OFF position when
you get up the next day, or after airing the
bed.
Connecting and removing the controller:
To remove the controller, lift the locking tab up
with your finger and pull the plug directly out.
Do not pull the controller cable and do not try
to pull the controller plug out without lifting the
locking tab, as you will damage the socket. To
connect the controller lift the locking tab up
with your finger and pull the plug directly in.