4
HOW TO USE
Before first use
Remove all packaging
It is important to ensure the correct plug adaptor is used when operating in a country not using the UK 13
Amp socket system. If in doubt, consult a qualified electrician.
Fill the kettle with water via the spout .You can also fill the kettle by lifting the locking lid. Ensure the lid is
firmly closed after filling.
Check that the water level is between the MIN and MAX lines on the water gauge.
PLEASE DO NOT OVERFILL THE KETTLE PAST THE MAX LEVEL. DOING SO POSES A SCALDING RISK.
Place the kettle on its base, Connect the plug to the mains supply and press the power switch down
The kettle will switch itself off once the water has boiled
If this is the first time you have used the kettle, discard the water from the first
boiling.
SK261050_IM.indd 4
08/10/2014 12:58
