5
HOW TO USE
Before first use, remove all packaging
It is important to ensure the correct plug adaptor is used when operating in a country not using
the UK 13 Amp socket system. If in doubt, consult a qualified electrician.
•
Do not remove the teapot from the base during the filling cycle as scolding water will be
ejected.
•
After filling the tank, ensure the cap is properly secured. Do not open the cap during the
boiling cycle
•
After the tea making cycle is complete, wait a few minutes before removing the filler cap
as it will be hot.
•
Fill the ceramic jug with water to 1” (25mm) below top.
•
Open the lid and remove the tank cap by turning it anti-clockwise
•
Pour the water from the jug into the tank and replace the tank cap by turning it clockwise.
•
Place the ceramic jug back on it’s stand on the TEASMADE, ensuring that it is resting
firmly against the safety switch
•
Press the TEA NOW button and wait
•
In a few minutes the water in the tank will boil and be ejected into the pot. You will hear the
traditional TEASMADE woosh! as the water is ejected from the tank into the ceramic pot.
•
Once this process is complete, discard the water from the pot
•
Your TEASMADE is now clean and ready to use.
SETTING THE CLOCK
Remove the lid from the Teasmade. There are 2 adjustment knobs. One is to set the clock, the
other is to set the alarm. Set the clock first then set the alarm. Note: The clock adjustment
knob needs to be pressed down and turned.
ALARM WITH TEA BUTTON
This button overrides the ON setting of the ALARM ONLY function.
This button has 3 settings:
•
SET (for Tea+Alarm)
•
OFF (for no function)
•
TEA NOW (starts the tea making process on pressing if the tank is filled and the jug is in
position)
•
In the ON position, tea making will start at selected alarm time.
•
ALARM ONLY BUTTON
Set Alarm with Tea button to OFF position.
Use this button when the tea making function is not required. This button has 3
settings:
•
SET (for Alarm only)
•
OFF (no function)
