Reading light
To operate the reading light simply press
the reading light button
Cleaning and maintenance
Ensure the product is unplugged from the mains and completely cooled before cleaning.
The pot should be cleaned daily with warm soapy water, then rinsed with clean water.
Do not leave water in the tank for long periods. Wait until the product has cooled before
emptying the tank.
The outside of the unit can be cleaned with a soft cloth moistened with a mild detergent solution.
DO NOT USE CHEMICAL OR ABRASIVE CLEANERS. DO NOT IMMERSE THE UNIT IN WATER.
Descaling instructions
Excessive lime scale build-up will hurt your precious TEASMADE!
It is important to de-scale the product regularly in order to maintain best performance.
Use a good de-scaling agent available from most supermarkets. Fill the tank using the
pot and include the de-scaling agent. LEAVE THE FILLER CAP OFF on this occasion.
Place the empty pot on it’s stand, ensuring it is in contact with the safety switch.
Press the TEA NOW button. The water in the tank will boil.
Note: With the filler cap off there will be an increased amount of steam so be careful.
Once the water in the tank is boiling, press the TEA NOW button to switch it off.
Carefully replace the filler cap and press the TEA NOW button once again. The water
will be ejected into the pot. This will de-scale all the pipes and tubes inside the TEASMADE.
Once de-scaling is complete, allow the unit to cool and rinse the tank and pot in clean water.
To change the lightbulb
1 Disonnect the product from the mains supply
3 Unscrew the bulb in anti-clockwise direction
2 Remove the 2 screws from the lamp cover
4 Replace with bulb of same type: E14 15 Watts
Reading
light
Tea
now
Automatic
tea
Alarm
Alarm set
Timer
Содержание TEASMADE STM100N
Страница 1: ...teasmade instruction manual STM100N...
