Swann SWIFI-DOORBELL, Быстрый старт

Страница: 5 / 44

5
EN
Pairing with the Video Doorbell
1 Briefly press the Pair button on the Chime. The Chime beeps once to indicate that it is in
pairing mode.
2 Within 10 seconds, press the Doorbell button on front of the Video Doorbell. You’ll hear the Chime
sound the ring melody, indicating pairing is complete.
Note: If not paired within 10 seconds, the Chime double-beeps to indicate that it is no longer in
pairing mode. In this case, simply repeat the above steps to pair the Chime with the Video Doorbell
again.
Changing the ring melody
Press the Melody Select button on the Chime repeatedly to cycle through all the available melodies.
Stop when you hear something you like. There is no need to confirm your selection.
Adjusting the volume
Press the Volume button on the Chime repeatedly until the desired volume is obtained.
Resetting
To remove all pairing information and restore default settings, press and hold the Pair button on
the Chime for five seconds until you hear five beeps in a row.
SET UP THE CHIME