Swann SW351-CAC Скачать руководство пользователя страница 3

33

Do not 

• 

expose any part of the alarm unit to any sudden shocks (such as being 

dropped or struck).

Do not

• 

 install the passive infrared (PIR) alarm unit within detection range of 

any device which emits heat or cold, such as air conditioners, refrigerators, 
ovens,  heaters,  microwaves  or  other  electronic  equipment  which  generates 
heat as a by-product of operation.

Do not

• 

 install the PIR sensor in direct sunlight.

Use only alkaline batteries.

• 

All components are for indoor use only.

• 

 Do not install outdoors.

Replace the batteries in the unit every six months.

• 

 

Test the alarm periodically

• 

 (every 1 - 2 months and each time you change 

the batteries) to ensure it is working properly. 

Keep this operating instruction booklet in a safe place.

• 

This alarm system is designed to be, and acts as, a theft deterrent.  This 

• 

system, like any other, cannot offer complete protection for your home 
or business - it is simply an alarm system.

 Like all practical systems, it has 

limitations and it could be disabled by a skilled intruder. We suggest that you 
avoid relying solely on the Ceiling Alarm to protect your property, but use it 
as part of a comprehensive security solution. You can increase your level of 
protection through the use of high-quality locks, stronger doors, guards for 
your windows and a CCTV system and recording devices.

Important - Read Before Installing

Содержание SW351-CAC









Отзывы: