Swann SW244-BVD Скачать руководство пользователя страница 4

Hands free Communication

Automatic Display

Unlock Button

Night Vision

This device provides hands free communication between the black and white monitor
and the outdoor intercom unit. With a press of a button, you can communicate

with the visitor at the door.

When the visitors press the doorbell button , the bell will ring and a picture of the
visitor will be automatically displayed . You can safely identify the visitor before talking
or opening the door.

With a button for opening an electronic door latch, you are able to open the door from the
LCD monitor without going directly to the door.
* Note: This is an optional extra available from Swann. (SW-D-LOCK)

* Night vision distance will vary with the amount of available light.

The 6 infrared LEDs on the camera allows you to recognize the visitor during times of low light.

Calling by the Visitor

Other operations

A visitor presses the
"call" button on the
intercom.

The

visitor

the

door phone will ring and

the

is displayed on

monitor.

Press

"

” button

communicate with the visitor.

the talk

to

Once

ress "talk” button to

in 2 minutes

he picture will be displayed on the monitor. I

you p

communicate with the visitor, the monitor will be shut down

automatically

.

When the visitor presses the “call” button, t

f no one

answers, the monitor will automatically go back into standby mode after 60 seconds.

W

arning button

Adjustable volume/contrast

If you get malice visitors, you can press warning button. The intercom unit will give an audible alarm
and bring attention to area around the intercom unit.

If you think the monitor volume is not loud enough or the picture shown on the screen is too bright,

you can alter this by adjusting the volume or contrast wheel found underneath the monitor

.

Operation

9

Functions

4

FCC Notice

SW244-BVD

CE Notice

We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA, declare under
our sole responsibility that the product:

This product meets the requirement specified in Part 15 of FCC Regulation. Operation rests with the following two
conditions:

(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible interference caused by

operation mistakes. After testing the product, we confirm that it complies with the provision for class C digital
equipment in the 15th part in FCC regulation; and the receiver complies with the limitation for class B digital
equipment in Part 15 of FCC regulation. The product generates, applies and emits radio waves. It might cause
harmful interferences to wireless communication if not be installed and used following the description of the manual.
The product may interference in residential area, and the customer should take remedies to eliminate the
interference at their own costs. If the product causes any harmful interference to wireless equipment of disturbs the
receiving of TV signals (it can be identified by turning on and off the product), you can solve the trouble by following
methods:

(1) Re-adjust the product or put it in another place;

(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help

This product complies with standards including Low Voltage Device Directive 73/23/EEC;

Directive 89/336/EEC

and

Directive 1999/5/EC. It passed the subject tests by authority concerned and it authorized to bear

mark.

EMC

R&TTE

CE

Отзывы: