7
Troubleshooting Guide
Technical Specifications
Problem:
I can’t see the camera on my TV.
Solution:
Ensure the camera is plugged in and the TV or VCR is tuned to the
correct input channel.
Problem:
When I view my camera at night I only see a bright spot and no image.
Solution:
Night Vision will reflect when shining through a window. Move the
camera to the other side of the window or another location.
Problem:
The BNC Extension Cable will not connect to my TV.
Solution:
Connect the BNC to RCA adapter to the end of the Extension Cable
and plug into the TV.
Problem:
On my Swann DVR, Video Loss appears where my camera should be.
Solution:
Check the Extension cable is securely connected to the camera and
check the connection is secure on the back of the DVR. Also ensure the camera
has power by trying a second power outlet.
7
Video
Image Sensor
1/3” Color Super CMOS
Video Quality
400 TV Lines
Number of Effective Pixels
NTSC: 510 x 492 / PAL: 628 x 582
Minimum Illumination
0 Lux (IR on)
Day/Night Mode
Color during day / switches to B&W night
White Balance
Automatic
Signal / Noise Ratio
> 50dB
Electronic Shutter
1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL
Gain Contr=ol
Automatic
Backlight Compensation
Yes
Lens
6mm
Viewing Angle
53 degrees
Night Vision
Number of Infra-Red LEDs
30
Infra-Red Wavelength
850nm
Night Vision Distance
Up to 30ft / 9m
Infra-Red LED Life
10,000 hours
General
Operating Power
DC 12V
Operating Temperature
-10°C ~ 50°C / 14°F ~ 122°F
Body Construction
ABS Plastic
Dimensions - Camera
5.5” x 2.8” x 2.8” / 140mm x 70mm x 70mm
Dimensions – Stand
4.5” x 2.3” x 2.3”/ 120mm x 60mm x 60mm
Weight – Camera & Stand
0.5lbs / 235g
