3
HOW TO USE
Remove all packaging. It is important to ensure the correct plug adaptor is used when
operating in a country not using the UK 13 Amp socket system. If in doubt, consult a
qualified electrician.
•
Do not remove the teapot from the base during the filling cycle as scolding water
can be ejected.
•
After filling the tank, ensure the cap is properly secured. Do not open the cap
during the boiling cycle
•
After the tea making cycle is complete, wait a few minutes before removing the
filler cap as it will be hot. DO NOT OVERFILL
1. Fill the ceramic jug with water to 1” (25mm) below
top.
2. Open the lid and remove the tank cap by turning it anti-
clockwise
3. Pour the water from the jug into the tank and replace
the tank cap by turning it clockwise.
4. Place the ceramic jug back on it’s stand on the
TEASMADE,
ensuring that it is resting firmly against
the safety switch
5. Press the TEA NOW button and wait
6. In a few minutes the water in the tank will boil and
be ejected into the pot. You will hear the traditional
TEASMADE woosh! as the water is ejected from the
tank into the ceramic pot.
7. Once this process is complete, discard the water from
the pot
Your TEASMADE is now clean and ready to use.
SETTING THE CLOCK
Insert the plug into the mains socket. The hands of the
LCD clock will be at the 12:00 position. The alarm set dot
will also be at the 12:00 position.
Press the CLOCK SET button to advance the clock hands
to the right time. Each press will advance the clock 1
minute. To fast forward the clock press and HOLD the
CLOCK SET button. Note: there is no am or pm setting.
The TEASMADE uses a 12 hour clock.
TEA NOW! BUTTON
CLOCK SET BUTTON
STM200N_IM.indd 3
15/06/2015 11:52
