4
HOW TO USE
Before first use remove all packaging
This product will work on a wide range of voltages from 110 – 240V AC. However, it
is important to ensure the correct plug adaptor is used when operating in a country
not using the UK 13 Amp socket system. If in doubt, consult a qualified electrician.
Fill the kettle with water by removing the lid. It is recommended that you use one of
the supplied cups to add 1 or 2 cupfuls of water to the kettle. Ensure the lid is firmly
closed after filling.
Check that the water level is between the MIN and MAX lines on the inside of the
front of the kettle. The MAX level is about half way up the kettle (0.5 litres). The rest of
the space is needed for the steam to operate the auto cut-off mechanism.
PLEASE DO NOT OVERFILL THE KETTLE PAST THE MAX LEVEL. DOING SO POSES A
SCALDING RISK.
After filling. connect the plug to the mains supply and press the power switch on top
of the handle. The power light will illuminate.
Once the water has reached boiling point, the kettle will switch itself off shortly after.
If you need to stop the boiling process before it is completed, simply switch the kettle
off at the mains plug. The auto switch will reset itself once the kettle has cooled.
If this is the first time you have used the kettle, discard the water from the first boiling.
SK19010N_IM.indd 4
08/10/2014 09:59
