11. Do not let the cord hang over the edge of a table or counter. Ensure that the cord
is not in a position where it can be pulled on inadvertently.
12. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas
or electric burner or in a heated oven.
13. Do not use the appliance on a gas or electric cooking top or over or near an open
flame.
14. Use of an extension cord with this appliance is not recommended.
15. This appliance is not suitable for outdoor use. Do not use the appliance for
anything other than its intended use.
16.
Do not carry the appliance by the power cord.
17. Do not leave the appliance unattended during use. Always unplug the unit when
not in use or before cleaning.
18. Always operate the appliance on a smooth, even, stable surface. Do not place
the unit on a hot surface.
19. Ensure that the unit is switched off after use.
20. The manufacture does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised personnel.
21.
In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the appliance to an authorised service facility for examination,
adjustment or repair. Always insist on the use of original spare parts. Failure to
comply with the above mentions precautions and instructions, could affect the
safe operation of this product.
22. DO NOT USE THIS PRODUCT IN CONJUNCTION WITH AUTOMATIC TIMERS
23.
NEVER ATTEMPT TO MOVE OR CLEAN THIS PRODUCT UNTIL IT HAS
COMPLETELY COOLED
U.K. Plug Wiring Instructions
The wires in the mains lead are coloured in accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead of this appliance may not correspond with
the colour markings identifying the terminals on your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked
with the letter N or coloured black. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L or coloured red. The wire
which is coloured GREEN/YELLOW must be connected to the terminal which is
marked with the letter E or (earth symbol) and is coloured GREEN or
GREEN/YELLOW.
WARNING: THIS APPLIANCE MUST BE EARTHED
