DVR or MONITOR
With RCA Sockets
O T
U
IN
O
V
E
D
I
D
VI EO
D
U
A
O
I
D
A
IO
U
1
1
3
3
2
2
The PRO-770 Security Camera is compatible with all Swann Standalone DVR
Systems or any TV, VCR or DVR with BNC / RCA connections.
1. Connect the PRO-770 Camera to the BNC Extension Cable. Connect both DC
and BNC connections to the extension cable
2. Use the optional BNC to RCA adapter if connecting to a TV, VCR or other A/V
device. Otherwise, connect the BNC connector to your existing DVR
3. Connect the Power Adapter to DC connection on Extension Cable. When all
connections are complete, plug in the power adapter to an available power outlet
4. Tune your TV, VCR to the correct input channel to view the camera or turn on
your DVR to view
5. Tilt / aim the camera to the desired area of coverage
6. Adjust the lens focus as per instructions on page 3
7. Mount camera to desired location for permanent installation (if applicable)
Connecting PRO-770
5
5
4
4
!
!
Please test all devices before final installation as it is far easier to rectify
problems at this stage
!
To avoid the risk of damage use only the supplied power adapter
!
Areas with a bright background may cause degradation of the image. If possible
position your camera so that it doesn’t point towards a very bright light source
!
Do not cut the DC power cable of the Camera to fit with another power source.
This may result in damage to the Camera and may void your warranty
Best Results are achieved when the camera is looking down on the subject area
1. Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs, is preferable to, and cheaper than,
cleaning up after it occurs
- the Swann PRO-770 Camera is an example of cost effective security utilising
the 'art of deterrence' to stop thieves and criminals
2.
Always place cameras high enough that they can't be closely inspected or easily
accessed
3.
Position cameras and dummies where they can be easily seen for maximum
deterrence
4.
Position a monitor where it can be seen but not touched
5.
If you have more than one camera use a monitor with channel switching function,
a Quad Processor or DVR with multiple views to show potential offenders the
level of coverage you have protecting your site
6.
Add extra Swann dummy cameras to give the impression of heightened security.
7.
Purchase a Swann DVR to monitor and record activity on your cameras.
Depending on the settings used, DVRs can record for months
8.
Position a VCR with tapes or boxes close to your monitor for added effect,
implying there is a security video recorder even if there isn't one
Important Information about this product
Tips for using your Swann Security camera
Содержание PRO-770
Страница 6: ...6 6 ...