2
Contents
Quick Reference
Power Supply
Before
You
Begin
1
Contents
2
Quick
Reference
2
Power
Supply
2
Introduction
3
Layout
of
the
Camera
3
Layout of the OSD Controller
4
Notice
about
this
Manual
4
Camera
Installation
Choosing
the
Location
5
Attaching
the
Mount 6
Mounting
the
Camera
6
Connection
Guide
7
DVR
Configuration
Configuring
the
PTZ
Settings 8
Changing the Camera’s Command Address
8
Camera
Operations 9
Advanced Feature: On-Screen Display
9
Troubleshooting
10
Helpdesk / Technical Support Details
Rear Cover
Default PTZ Configuration
Command Address:
1
Protocol:
Pelco-D
Baud Rate:
9600bps
RS485 Polarity:
+A
Red
Wire
-B
Black
Wire
• Be sure to use only the 15V power adapter that is supplied with the PRO-754. Basically,
it’s got a little extra juice to power the infrared LED arrays in the dome at the same
time as the camera.
• Don’t use the 15V power supply for other cameras. Likewise, don’t use other camera’s
power supplies with the PRO-754. Doing so may cause unintended damage to the
camera.