7
ZOOM + / -
: Increases and decreases the level of magnification, respectively.
The PRO-750 features a 3x optical zoom.
FOCUS + / -
and
IRIS OPEN / CLOSE
The PRO-750 PTZ Dome features automatic focus and exposure adjustment.
As a result, you will not need to use these buttons whilst operating the
PRO-750. They’ve been included on the remote so that the controller can be
used for multiple PTZ systems (including ones without automatic focus and
exposure adjustment) if you choose.
ARROWS
Used to move the camera.
SHOT
Readies the controller to accept a numerical
value for a Preset Position, noted on the
display by the letter “P”.
CAM
Readies the controller to accept a new
Command Address (use numerical buttons to
enter a new value).
ENTER
Confirms a selection. Whilst the camera is
moving, ENTER will hold it still.
SPEED
Adjusts the speed at which the camera moves.
Higher numbers represent faster speeds.
AUTO
Toggles Auto-scan Mode on and off. Whilst in
Auto-scan Mode, the camera will continually
move as it attempts to sweep the entire field
of view as efficiently as it can.
FOR MORE detailed information about
operating the PTZ features of the PRO-750
Dome, see
Operating the Camera
on page 14.
ESC (Escape)
Stops the current action and returns to the
default interface. Aborts half completed
sequences, such as programming a cruise
pattern.
SETUP
Readies the PTZ Controller to accept new
values for Baud Rate and Protocol. The “p”
and “d” are protocols (Pelco-P and Pelco-D
respectively) and the numerical value is the
abbreviated Baud Rate.
Meijer.com
