2
Connect your Cameras
1
4
To connect your cameras to the NVR, simply connect the supplied Ethernet cable to the LAN connection on the camera
then plug the other end of the Ethernet cable (1) into one of the camera inputs on the back of the NVR.
It doesn’t really matter which input you use as they are quite versatile and will be configured in a later step. Please
note; the Ethernet cable is the same at both ends so it doesn’t matter which end plugs into the camera or NVR.
The reset button is used
to perform a factory reset.
1
4
3
2
1
9
10
11
12
5
6
7
8
16
15
14
13
AUDIO OUT
AUDIO IN
VGA
LAN
POE
Locking Ring
LAN
Reset
Ethernet Cable
Power
