Night Hawk™
FAQs
www.swannsecurity.com
Please note that the information
contained within this document is
subject to change without notification.
Current at March 2007.
From time to time cameras that use 2.4GHz transmission may experience some
interference from household devices such as cordless telephone, wireless internet
connections, microwave ovens and baby monitors. There is a solution!
Swann’s Night Hawk range of security cameras come with 4 switchable frequency
channel settings to avoid interference.
How to change the channel on your NightHawk camera
Unscrew the front of the camera case to gain access to the channel switch. To change the
frequency/channel on the receiver, press the SEL button on top of the receiver to cycle
through the channels. You can also switch the Loop/Normal switch to Loop, which
will allow the receiver to switch through all four channels automatically. The lit LED
indicates which channel is currently selected.
Front view of Switch Block (note the numbers 1 & 2 indicate the left side of the switch)
By changing these switch settings, the frequency that the camera transmits on
changes. Once you have set the channel on the camera, select the
same channel on the receiver. If you experience interference try
a different channel.
Note:
Do not set two cameras to the same channel or
they will interfere with each others signal.
Main Camera Features & Benefits
• Quality color surveillance suitable for home, office and retail security
• DIY - no cable installation required
• Professional quality images
• 11 Infra-red LEDs for night vision
• Included receiver is easily connected to a DVR, VCR, TV or PC (With Capture Card)
Avoiding Interference!
with your Swann NightHawk Camera
Protect Property
Monitor the kids
RS Codes:
NightHawk:
49-1059
NightHawk without Receiver:
49-1057
NightHawk Twin Pack:
49-107
