8
Instructions for Use
2.
Check the upholstery or carpets colour-fastness. Dip a piece of
white fabric into the cleaning solution that you are using (see
section “Preparing the Cleaner/Filling the Fresh Water Tank”)
and carefully rub a hidden part of the area to be cleaned. If the
fabric does not discolour, you can clean the surface safely with
the chosen solution and cleaner. For multi-coloured surfaces
test all colours for colour-fastness.
Preparing the cleaner/filling the freshwater tank
CAUTION!
Only use commercially available carpet and upholstery
cleaning fluids, this includes Swan’s Dirtmaster Carpet Detergent
250ml (SDMWDV250) and 1L (SDMWDV1000).
Do not use any high foaming cleaners as an excessive amount
of foam impairs the function of the cleaner and can block the vent.
1.
Hold the cleaner by the handle and release the freshwater tank
by holding the 2 upper indentations and pulling until the tank
comes off.
2.
The refilling cap on the base of the clean water tank should be
unscrewed and removed.
3.
Fill the tank with the chosen cleaner and warm water to a
(maximum of 40°C), following the ratio mixing levels for water
to cleaning solution. It is advised to do this in a jug prior to filling
the tank.
4.
Fill the freshwater tank to the ‘Max’ level, replace the cap and
mount the tank back onto the cleaner. Apply slight pressure and
it will snap back into its location.
