10
OPERATING BASICS
Adjusting the alarm volume
You can change the loudness of the Indoor Alarm Receiver
using the
Volume
button on the back of the receiver.
Three volume levels are available:
High
,
Medium
and
Low
.
Silent mode
Like some peace and quiet for a period of time? You can put the
alarm triggered by your Alert Sensor on “silent”. Simply press
the
Channel
button that corresponds with the Alert Sensor that
you want the alarm muted. The Indoor Alarm Receiver beeps
twice, confirming the alarm has been turned off.
If the Alert Sensor detects movement while the alarm
is muted , you will still be visually alerted by the
corresponding
Channel LED
indicator blinking on the
Indoor Alarm Receiver.
To unmute the alarm, press the corresponding
Channel
button again. You will hear a single confirmation beep from
the Indoor Alarm Receiver.
Low battery warning
Your devices will notify you when batteries are running low on
power.
• Install new batteries immediately for the Indoor Alarm
Receiver when all 4 LED indicators start blinking at the
same time.
• Install new batteries immediately for the Alert Sensor
when the status LED starts blinking continuously.
OPERATING BASICS
