Press the
button to stop a video/audio recording. The data indicator will flash
while the data is writing to the SD Card. The time display indicates the duration of
the video/audio recorded. For example, the below figure indicates 10 minutes 3
seconds of video/audio has been recorded.
You can press
button again to start another video/audio recording or press and
hold
button for 2 seconds to exit video mode and return to time display mode.
IX.
Connecting the FlashlightDVR to PC
11
Connection to PC
Connect the USB cable to your PC USB port. Connect
the mini plug end of the cable to the FlashlightDVR
mini-USB port as shown at right. A popup window will
display the “Found new hardware” message and the
system will automatically install the corresponding driver.
Once the installation is complete “Removable Disk” will
appear in the “My Computer” folder.
When connected, the FlashlightDVR will show “USB” on the LCD panel.
Содержание FlashlightDVR SW244-TDV
Страница 1: ...FlashlightDVR USER MANUAL SW244 TDV...
