Step 4:
Using the appropriate screws for the surface you are
mounting to, secure the bracket in place. If mounting to a wooden
surface, screw the bracket directly to the surface. If mounting to a
masonry surface (brick or concrete), you’ll need to use the supplied
wall plugs.
Step 5:
Connect the supplied Ethernet cable to the camera’s cable
(see
Fitting the Weather Protector
to seal the connection). Reconnect
the black cable on the camera to the black cable connected to the
bracket. Rotate the seal cap anti-clockwise to tighten.
Sit the dome camera onto the camera bracket (as shown above right),
then place the dome enclosure into the camera bracket and lock it
in place. The camera can be rotated left or right (rotate the camera
bracket left or right as well) or up and down. Check the image on your
NVR and make adjustments as necessary.
Mounting the Camera
4
