How the Imitation and Real Security Cameras Work
The Real Camera will allow you to view your customers or someone at the front door, while the Imitation
Security Camera gives people the impression that you have more working cameras than you really do. With
its realistic camera casing and camera cable, it looks like a real surveillance camera. You can easily mount the
imitation security camera indoors or outdoors to deter possible thieves and intruders. Your real camera can
be mounted in the areas you most want to observe to provide the highest level of security.
Your security cameras come with a wall mounting plate, camera cable, camera stand ( connected to the wall
mounting plate), three 1-inch (25.4mm) screws, and the three drywall anchors.
Mounting the camera on your wall or ceiling
1.
Using the wall mounting plate as a template, use a pencil to mark the position of the three screw
holes on the mounting location.
2.
Drill three 1-inch (25.4mm) holes in the marked positions.
3.
If necessary, insert the three supplied drywall anchors into the screw holes.
4.
Insert a 1-inch (25.4mm) screw through each of the three screw holes in the wall mounting plate
and into the mounting surface, then tighten the screws.
5.
Insert the bolt at the top of the camera stand into the nut in the bottom of the imitation security
camera, then use a pair of pliers to firmly tighten it.
6.
Turn the camera stand’s knob to tighten the swivel on the camera stand.
7.
Connect the camera cable’s F connector to the plug on the back of the imitation security camera.
8.
Push the end of the cable through the base (Imitation Camera) or through a hole in the wall or ceiling
Make sure you maintain the same method of securing the cable as the Real camera to ensure the
Imitation cameras are indistinguishable from the Real camera.
Camera Cable
Drywall Anchor
Knob
Camera Stand
1-Inch (25.4mm) Screws
Wall Mounting Plate
2
5
While the Swann Security Monitor is designed for use with the Real security cameras provided,
you can still connect almost any device capable of displaying video to the monitor.
Monitor Features
1. Input Channel Selector
2. Auto Switch mode selector
3. Channel switch timer knob
4. Volume knob
5. Power button
A.
2 x 9Volt DC Power output for cameras
B.
12 ~ 13.5Volt
.
Video
E.
Audio
F.
Video
G.
Vertical Hold knob
H.
Brightness knob
I.
Contrast knob
J.
Video, Left and Right Audio Output RCA Sockets
DC Power In Socket
C.
Audio In RCA Female Socket (Channel 1)
D
In RCA Female Socket (Channel 1)
In RCA Female Socket (Channel 2)
In RCA Female Socket (Channel 2)
Front View
Rear View
1
A
2
4
5
I
3
J
B
D
G
F
C
H
E
