3
MELODY SELECTION & PAIRING
RECORDING YOUR CUSTOM MELODY
ADJUSTING THE SPEAKER VOLUME
RESETTING THE SPEAKER
You can personalize the melody played on the Speaker when the Doorbell button is pressed. To select a
melody on the Speaker and pair it with the Doorbell:
1. Press the
Previous
or
Next Melody Select
button repeatedly on the Speaker to cycle through the
available sounds (including your recorded custom melody. To learn how to record your custom
melody, see "
Recording your Custom Melody
"). Stop when you hear something you like.
2. Press and hold the
Volume
button on the Speaker for about 5 seconds, until a quick tone is heard
and the LED indicator starts blinking. The Speaker is now in pairing mode.
3.
Within 5 seconds, press the Doorbell button. The Speaker will confirm pairing by playing the selected
melody with the LED indicator blinking while the melody is playing. If pairing is not completed within
5 seconds, a quick tone is heard and the LED indicator goes off. In this case, you will need to repeat
steps 2-3 to try pairing again.
4. At any time, you can change the melody. Simply repeat the steps above each time you want another
melody selected.
You have the option of recording your own custom melody (up to 40 seconds long) with your favourite
tune on the Speaker directly from your mobile device or computer.
1. Plug one end of the supplied 3.5mm audio cable into the AUX jack on the Speaker and the opposite
end into the headphone jack on your mobile device or computer.
2. Open your favourite music app on your connected device. Find the track that you want to record
and get it ready (for example, skip to your favourite parts of the track) for playback. When music is
played, you will be able to hear it through the Speaker. Use the Volume buttons on your connected
device to directly control the volume (recording level) of the music coming through the Speaker.
3. To start recording your custom melody, press any button on the Speaker once. The Speaker will beep
and its LED indicator will turn solid blue indicating the Speaker is recording now.
4. Now start playback of the track on your connected device.
5. The Speaker automatically stops recording at 40 seconds or you can stop recording at any time
before that by pressing the "Pause" button in the music app. The Speaker will double-beep to
indicate it has stopped recording and then replay the music recorded from your connected device
automatically. If the recording ended automatically, you need to stop music playback on your
connected device so that you can listen to the recording through the Speaker.
6. If you want to re-record your custom melody, simply repeat steps 3-5.
7. Once you are done recording your custom melody, unplug the audio cable from the Speaker and
connected device.
8. To select your custom melody on the Speaker and pair it with the Doorbell, follow the steps
described in
"Melody Selection and Pairing"
.
The volume of the Speaker is adjustable. Simply press the
Volume
button until the desired volume level is
obtained. You will hear the difference in volume each time the
Volume
button is pressed.
You can reset the pairing information on the Speaker. Simply press and hold the
Next Melody Select
button on the Speaker until a quick tone is heard and the LED indicator blinks once.
