Introduction
Your Color Quad package comes with
Simple Connection Instructions
Operation - Front Panel
Operation - Rear Panel
Menu Screens
Technical Specifications
Warranty Information
Help Desk / Support Details
2
2
3
4
5
6
7
Back Cover
Back Cover
The Swann Quad Processor is a low cost, convenient security solution for monitoring up to four
areas in your home or business at once. Simply connect up to four security cameras to the
Swann Quad Processor and view them on any A/V TV, VCR or Swann security monitor and you
can keep an eye on all the important areas from one central location!
Choose between a quad screen (4 cameras at once), split screen, picture in picture or see each
camera view individually in full screen. The Swann Quad Processor also features an auto-switch
function allowing you to scan between all camera views (including the split screen) with a user
definable pause on each screen.
INSTALLATION
•
1 x Color Quad Processor
•
1 x 12Volt Power Adaptor (design may vary between countries)
•
7 x BNC Male to RCA Female adaptors
•
1 x IR Remote Control
•
1 x RCA A/V Cable
•
This Instruction Sheet
If any of these items are missing, please contact your retailer.
Refresh Rate
NTSC/30frames/sec PAL/25 frames/sec
Resolution
NTSC: 720 x 480 PAL: 720 x 576
Video System
PAL or NTSC switchable
Video Input
1.0Vp-p/75 ohms
Video Output
1.0Vp-p/75 ohms
Power Source
12Volt
Operation Temperature
32°F ~ 122°F
0°C ~ 50°C
Dimensions
10W x 7L x 1½H (inches)
250W x 180L x 40H (mm)
Weight
2 pounds
1KG
Ports Camera In x 4 - BNC Female
VCR In x 1 - BNC Female
VCR Out x 1 - BNC Female
Monitor Out x 1 - BNC Female
Alarm x 1 - 9 Pin Serial Port
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation.
Index
Introduction
Your Color Quad Package Comes with...
Technical Specifications
2
7
FCC Notice
CE Notice
L
V
D
We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA 90670 USA,
declare under our sole responsibility that the product:
This product meets the requirement specified in Part 15 of FCC Regulation. Operation rests with the
following two conditions:
(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible interference
caused by operation mistakes. After testing the product, we confirm that it complies with the provision
for class C digital equipment in the 15th part in FCC regulation; and the receiver complies with the
limitation for class B digital equipment in Part 15 of FCC regulation. The product generates, applies and
emits radio waves. It might cause harmful interferences to wireless communication if not be installed
and used following the description of the manual. The product may interference in residential area, and
the customer should take remedies to eliminate the interference at their own costs. If the product
causes any harmful interference to wireless equipment of disturbs the receiving of TV signals (it can be
identified by turning on and off the product), you can solve the trouble by following methods:
(1) Re-adjust the product or put it in another place;
(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help
This product complies with standards including ow oltage
evice Directive 73/23/EEC;
Directive 89/336/EEC and
Directive 1999/5/EC. It passed the subject tests by authority
concerned and it authorized to bear
mark.
SW231-WOC
EMC
R&TTE
CE
