RedAlert/BlueAlert Digital Video Recorder
RedAlert/BlueAlert Digital Video Recorder
Advanced Motion Detection Setup
1. From the
Setup
menu, press
the
Left/Right
buttons to highlight
Motion Detection Area
and press
OK
.
2. Press
Left/Right
to change the size of the area of detection (Large, Medium or Small
Box) and then press
OK
. Motion will be detected only within the box selected.
3. Press
Up/Down/Left/Right
to move detection box to a region you would like to detect
motion and then press
OK
to confirm and return to the
Setup
menu.
5
. Press
OK
to change the
Motion Detect Count
. This value can be set to 1, 3 or 5 photos
taken per motion detection event.
6. Next, press
Left/Right
to highlight
Motion Detect Interval
. This setting indicates the
pause in seconds between two separate motion events.
7. Press
OK
to change the pause or delay to 1, 3 or 5 seconds between motion events.
4. Press
Left/Right
to highlight
Motion Detect Count
in the
Setup
menu. Motion Detect
Count indicates how many photos will be taken per motion detection.
Note
: This feature applies to photo recording only
8
9
5. Press
OK
to toggle
High/Low
image quality. If you are trying to conserve memory space
use
Low
otherwise the
High
setting is recommended.
