2
The Helicopter
The Remote Control
Upper Rotors
Lower Rotors
Charging port
Camera
Power ON/OFF
Micro-SD card slot
Flight stick
Trim control
Antenna mount
Battery indicator light
Throttle stick
Landing light ON/OFF
Tail Rotor Speed Control
Video Record button
Power switch
Tail rotor
11
Troubleshooting
Cannot control the chopper
•
Ensure the controller is switched ON.
•
Ensure the helicopter is switched ON.
•
Try pairing the remote and the helicopter again.
•
Check the batteries in the remote and if needed,
replace with new batteries.
• Ensure the antenna is securely attached to the
remote.
•
Ensure the helicopter is fully charged.
•
Do not fl y the helicopter in high winds as this may
make it hard to control.
•
Center the trim control and if needed, adjust the
trim again.
Helicopter will not ascend.
•
The charge in the helicopter may be too low. You
will need to recharge the helicopter.
•
Check that you are providing enough throttle to
lift the chopper.
Helicopter lands too fast
•
You are reducing the throttle too fast. Reduce the
throttle gently to get a gradual descent to the
ground and a softer landing.
Charging time
Approx. 60-70 minutes
Flying time
Approx. 5-8 minutes
Control distance
Approx. 20-30m / 65ft - 98ft
Frequency
27MHz
Battery (helicopter)
DC 3.7V output (580MA)
Battery (remote control)
AA 1.5V x 6 (not included)
Specifi cations
