58
A-96.250.131 / 050220
AMI Turbitrace
Program List and Explanations
3.2.2.41
Start time
: The start time can be set daily at any time of a day with
the [
] or [
] key.
Range: 00:00:00–23:59:59
3.2.2.2
Method
3.2.2.3
Run time
3.2.2.42
Calendar
:
3.2.2.42.1
Start time
: The programmed start time is valid for each of the pro
-
grammed days. To set the start time, see
3.2.2.42.2
Monday
: Possible settings, on or off
to
3.2.2.42.8
Sunday
: Possible settings, on or off
The automatic calibration is switched off.
The calibration can be started via an external PLC connected to the
input of the AMI Transmitter.
The calibration can be started via Fieldbus connected to the AMI
Transmitter.
3.30 Simulation
To simulate a value or a relay state, select the
alarm relay,
relay 1 and 2
signal output 1 and 2
with the [
] or [
] key.
Press the [Enter] key.
Change the value or state of the selected item with the [
] or
[
] key.
3.2.2.1
5.3.2.1
Mode off
5.3.2.1
Mode Input
5.3.2.1
Mode Fieldbus
