Swann activair SAC16870N, Руководство пользователя

Страница: 11 / 20

11
OPERATION
SAC16870N_IM.indd 11 27/03/2020 11:11
Select the desired mode Cooling, Dehumidification or Ventilation, by successively
pressing the MODE button on the unit or the corresponding button on the remote
control. The indicator corresponding to the selected mode lights up.
a. COOLING Mode:
The air is cooled and the hot air is exhausted to the outside through the exhaust
hose. Adjust the fan speed and the temperature set point according to the ambient
temperature.
The cooling function turns off when the room temperature is below the set temper-
ature. Ventilation, however, continues to operate at the set level. The cooling func-
tion starts again as soon as the room temperature exceeds the set temperature.
The set temperature can be set between 16 ° C and 31 ° C
b. DRY Mode
(
DEHUMIDIFICATION) :
When the DRY mode is selected, the fan speed can not be adjusted. By default, this
will be set to the slowest speed. The « Sleep » function can not be adjusted. Only
the timer function can be configured.
Note :
• It is not necessary to use the exhaust hose in the DRY mode
• Windows and doors must be kept closed.
• Continuous drainage can be achieved by connecting a drain hose to the back of
the unit.
c. FAN Mode:
When the VENTILATION mode is selected, the air circulates in the room without
be-ing cooled. Only the timer function and the fan speed can be configured.
Note :
• It is not necessary to use the exhaust hose in FAN mode.
• The temperature and « Sleep » function can not be adjusted and
selected
3. MODE SELECTION:
The buttons on the control panel or on the remote control allow you to select one
of the 3 modes:
• Cool (Cooling)
• Dry (Dehumidification)
• Fan