7
GET TO KNOW YOUR RADIO!
Bluetooth Mode
Select Bluetooth Mode
To select Bluetooth press “Mode” until “Bluetooth” shows on the display.
The radio is automatically in
pairing mode
and shows “Disconnected” on the display.
Activate the Bluetooth on your device and search for available devices. Look for and
add (SWAN RADIO] The radio will automatically pair with the device and no code is
required. The display will show ‘Connected’ if the pairing is successful.
Using Bluetooth
Make sure the source device has the maximum volume set. You can use the follow-
ing functions on the radio.
•
Play/Pause - ‘Select’ button
•
Skip Back - ‘Tune -’ button
•
Skip Forward- ‘Tune +’ button
The volume is controlled in the normal way by turning the dial.
System Options
System Menu Options
Press and hold the Info/Menu” button until you see either
‘Scan Setting’ in FM mode or ‘Full Scan’, in DAB mode. Press the tune +/- button to
cycle through the options until you get to ‘System’ then press the dial to select it.
The options here are:
Sleep > Alarm > EQ > Time > Backlight > Inactive Standby > Lang. > Reset > SW Ver.
Sleep
You can set the length of time the radio is on for with this feature.
Once selected from the system options you with have access to:
Sleep off > 15 >30 >45 >60 > 90 (Minutes)
SRA43010_IM.indd 7
03/08/2020 09:15
