SWAMP Setup Guide
XR402--XR-406
Included Parts:
1. Left Bottom Panel (1)
2. Right Bottom Panel (1)
3. Left Top Panel (3)
4. Right Top Panel (3)
5. 2x Support Bar (2 + 4) (bolts included)
6. Top Panel (3)
7. 4x Bolts (Top Panel to Left and Right Top Side Panels)
8. 4x ‘Long Bolts’ (Top Left and Right to Bottom Left and Right Side Panels)
9. 4x Wheels
1.
Attach
the rear support bar
(Piece 2)
, to both ‘bottom’ side panels
(Piece/s 1)
(
user may select which height level to attach support bar to)
Though do not tighten the bolts all the way up, leave them a tad loose.
2.
Attach
the rear support bar
(Piece 4)
, to both ‘top’ side panels
(Piece/s 3)
(
user may select which height level to attach support bar to)
Though do not tighten the bolts all the way up, leave them a tad loose.
3.
Sit
the ‘top’ side panel section
(Piece 3 + 4), on top
of the ‘bottom’ side panel section
(Piece 1 +
