swamp LT-LP-F07, Руководство пользователя

Страница: 3 / 4

3
1)In ten seconds, if no button was pressed,the LED display to turn off. Press any
button to turn on the LED display again.
(2)Whenever had any button be pressed, program will save all parameter after 2
seconds.
(3)No matter what the program in which mode,once to detect the DMX or SLAVE
signal, the program will jump into DMX or SLAVE mode automatically. Then,if DMX
or SLAVE signal was disconnect, the program will return to the original mode.
LED displayer Function
u255 White dimming,000-255 to change white color brightness
FH99 Strobe effect,01-99 to change strobe speed
CL01 Certain color effect,01-08 to choose certain color
CC99 Color Jump effect,01-99 to choose effect speed
DE99 Color gradually change effect,01-99 to choose speed
CP99 Color pulsing effect,01-99 to choose speed
Su01 Sound mode,01-09 to choose sensitivity
4 Channel instruction
CH4
0-255
W dimming.
8 Channel instruction
NO Value Function
CH1 0-255
Master dimming.
CH2 0-255
Red color dimming.
CH3 0-255
Green color dimming.
CH4 0-255 Blue color dimming.
CH5 0-255 White color dimming.
CH6 0-255
Strobe.
display Function
A001 8CH mode,
（
001 — 512
）
to select address
d001
4CH mode,
（
001 — 512
）
to select address
r255 Red dimming,000-255 to change red color brightness
G255 Green dimming,000-255 to change green color brightness
B255 Blue dimming,000-255 to change blue color brightness
No
Value Function
CH1
0-255
R dimming.
CH2
0-255
G dimming.
CH3 0-255 B dimming.