Swagway X1, Руководство пользователя

Страница: 16 / 29

-11-
5.3 Calibration
Step 1 :
Start with the Swagway powered off.
Step 2: Place each level parallel with the wheel touching the inside of the wheel base.
Step 3: Rotate the Swagway until both levels on each wheel base are level. If you do not have a level,
make sure both platforms are equal with each other and level to the ground as best as possible.
Step 4: While keeping the Swagway level, hold the power button down. The Swagway will make the
normal power on tone. Wait 3 seconds and you will hear a single beep. Release the power
Step 5: Power on again. The Swagway should now be calibrated. If the Swagway is still not calibrated
correctly , go to step 1 and begin making minor adjustments.
If your Swagway seems to pull to the left or right, you may need to recalibrate its
sensors. The process requires two levels, available at any hardware store .
button. Front LEDs will begin flashing. Power the Swagway off.
Many smartphones have free
"bubble level" apps as well.