SWAGTRON ZIPBOARD, Руководство пользователя

Страница: 15 / 30

III. HOW TO RIDE
3.1. RIDING INSTRUCTIONS
Before riding, equip yourself with suitable protective gear. Make sure the board
is placed on a level surface and fully charged. See SECTION 5.1 for charging
instructions. Battery status: Green (>40%), Red (10%~40%), Flashing Red ( <10%voice:
low power.). Do not ride your board when the battery is less than 10%.
STEP 1. Press the power button to turn on the zipboard.
STEP 2. The battery is in the back panel. That’s why
the board will always sit with the front panel
pointing up.
STEP 3. Turn the board on it’s side and press power
button to switch modes, Beginner Mode
(5km max) and Normal Mode (10km max).
Turn back the board on the level surface.
For safety, it is advised to use the Beginner
Mode for practicing skill, switch to Normal
Mode after you can control the board easily.
STEP 4. Carefully step one foot on the back panel,
then step the other foot on the motor to
enable the switch in the front panel. One
beep will engage, two beeps will engage when releasing the switch on the board.
STEP 5. Stand upright but relaxed and lean slightly left or right in the direction you want to go. Do not make any sudden or
jerky movements.
STEP 6. Lean back to slow down to a STOP. Keep one foot on the back pedal while slowly lifting the foot off the front pedal to
disengage the shuttle (two beeps).
Power Button
Motor Enable Switch
Battery Indicator
Assist Wheel
Front
Back
Front
Back
Front
Back
Front
Front
Back
Front
Back
Front
Back
Front Front
Back
Front
Back
Front
Back
Front Back
Front
Back
Front Back
Front
Back
Front
Back
Front
Back
Front
Back
Front
Back
Turn Left Turn Right
Front Back
Front
Back
Front
Back
Front
Back
Front
Front
Back
Front
Back
Front Back
Front Front
Back
Front Back
Front
Back
Front Back
Front
Back
Front Back
Front
Back
Front
Back
Front Back
Front
Back
Front Back
Turn Left Turn Right
Front Back
Accelerate
Stop Turn Left Turn Right
Decelerate