14.
Tighten the
seat assembly
to 13 lb·ft (17.5 N·m, 1.8 m·kg).
15. Insert the bottom of the
piston seal insertion tool
into
the
piston guide
. Insert the
piston seal and spring
into
the
piston guide and
use the top part of the piston seal
insertion tool to press the seal into place (17A). Then insert
the
piston seal retainer
, pressing it into place using the top
part of the piston seal insertion tool (17B).
Note: The open end of the
piston seal and spring
should
be facing up. The chamfer of the
piston seal retainer
should be placed against the piston seal and spring.
16. Insert the bottom of the
body seal insertion tool
into the
body
. Insert the
body seal and spring
and use the top part
of the body seal insertion tool to press the seal into place.
Note: The open end of the body seal and spring should be
facing down.
6
17. Push the
piston
into the
piston guide
.
18. Push the
piston guide
onto the body until it fully engages
with the
body seal and spring
.
19.
Insert the
inlet
filter
in the
inlet
(marked ‘HP’) using the
filter insertion tool
.
NOTICE
Do not insert the inlet filter with a sharp tool.
Damage to the filter could result.
20. Insert the
lower spring button
into the cap
assembly
with
the point towards the
range spring
if necessary.
Piston guide
Piston
Piston guide
Body
Body seal and spring
Piston
seal
insertion
tool
Open end up
Piston seal
and spring
17A
Chamfer facing
down
Piston seal
retainer
17B
Piston guide
Lower spring button
Range spring
Cap assembly
Open end down
Body seal
and spring
Body
Body seal
insertion tool
Body seal
insertion tool
Insertion tool
Inlet filter
HP
Inlet
