www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
S9710
Instruction Manual
Function and Description
This workshop lamp can be used for laminar lightings. The power supply is carried
out through any regular 220 V main socket. The lamp can be hung up on its built in hook.
Recommended applications
This lamp was designed for regular day-to-day usages (such as work-/reading light, typical
handheld or flash light applications) within the limits of its light output.
Any applications other than described in this manual are strictly forbidden and may lead to loss
of guarantee as well as exclusion of liability. Purposely executed modifications of the lamp will
also lead to those consequences.
Operating, security and service advices
Please follow the instructions of this manual. The disregarding of those instructions may lead
to physical damage, accidents as well as personal injuries. The workshop lamp is not a toy and
should be stored out of reach of children. The power chord may cause asphyxiation through
strangling. Do not leave packaging material carelessly lying around, because it might harm
playing children or animals.
Do not expose the lamp to harsh environments such as heat or cold, extreme mechanic impacts
or water (quick or prolonged immersion).
In case of any failure, defect, mechanical damage or operating error, not mentioned and
explained in this manual, switch of the lamp immediately and consult our service department
for further information or repair. Please follow all advices concerning technical support and
service handling, mentioned in our publications.
Handling
Before you start up the lamp for the first time, you should carefully unpack the lamp and connect
it to any regular 220 V main socket.
Storing, maintenance and service
Store the lamp in a clean, dry and cool environment.
Use a dry cloth to clean the lamp. For more serious contaminations use a damp cloth, instead.
When using a damp cloth though, keep the lamp disconnected from any power supply. Never
use harsh cleansers or chemicals on this device.
Specifications
Voltage of power supply unit: 230 V / 50 Hz
Length of power chord: 5 meters
Disposal
It is strictly forbidden to dispose this device with residual domestic waste!
This device is subject to the EU-guidelines for new and used electronic
devices and must never be disposed with residual domestic waste. This
device will be collected free of charge at your local collecting point.
