SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Straße 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: [email protected]
S3245
BED
IENUN
GS
AN
LEI
TUNG
/
INSTRUC
TI
ON
MAN
UA
L
www.swstahl.de
Safety
1. In case the square drive has a hole, always use steel pins and rubber rings, when
putting the impact socket on the square drive. When the square drive has a so-called
retaining ring, please always ensure that the retaining ring is in good shape and
when worn, it has to be replaced. A socket, which has not been secured in the 2
herefore-mentioned fashions, can be very dangerous and become a flying object!
Therefore we recommend never to use the impact wrench as a free running
instrument with socket attached.
2. Always use the special impact sockets.
3. An impact wrench should always be used just for loosening or tightening nuts.
4. The use of earprotection is advised.
Damages as a consequence of not following this manual, or caused by incorrect use or
incorrect repairs, will never be covered by our warranty and we will have no
responsibility for it. We reserve the right for technical improvements without prior
notification.
