SW-Stahl 4033592061452, Инструкция по эксплуатации

Страница: 10 / 20

10
AC T I VAT I O N
You can switch on the stethoscope on its left
side. Turn the volume control knob forwards
(there is a slight resistance) until the red LED
lights up. Now you can dial in the desired testing
volume by turning the control knob.
The one-way amplifier can be operated with
or without a tracer pin.
With tracer pin (attached via rubber adaptor)
Touch any aggregate (ex. alternator) and
other noises won’t have any influence on your
testing procedure. You can easily detect a
defective bearing.
Without tracer pin
Noise is transferred without touching an
aggregate. Unintended negative influences
caused by streams of air through the car’s fan
are amplified and will be made audible by the
headphones.
T E S T I N G W I T H S I X-WAY A M P L I F I E R
The six-way amplifier can be used for testing:
•
hard to reach spots
•
up to six spots simultaneously
•
when testing while driving
Perfect for checking rattling noise from the axles.
B AT T E RY
•
Push down the cover of the battery
compartment gently and shove it backwards.
•
Replace battery.
CHECK FOR THE CORRECT POLARITY.
On
Vol. up
Off
Vol.
down