32295L
SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Strasse 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid / Germany
E-Mail: [email protected]
BEDIENUNG
SANLEITUNG / INSTRUCTION MANUAL
5
ON/OFF Switch
1. To switch on the inspection camera, turn the ON/OFF switch (5) in direction ON.
2. To switch off the unit, turn the ON/OFF switch in direction OFF.
Using
1. Remove the protection foil from the display (4) and switch on the unit by turning the ON/OFF switch. On the LC display you will
see the live view of the camera head. For adjusting the brightness of the LED, turn the rotary switch up to the end in direction ON.
2. Insert the swan neck into the area that has to be inspected. Bend the swan neck if necessary.
3. When inspecting liquid filled objects resp. when immersing the camera head into liquids, make sure liquids cannot enter the
display. The LC display is not water-proof.
The camera head and the swan neck are water-proof, but not acid and fireproof. Do not immerse the camera head into hot, oily
and acid substances.
4. If you do not use the inspection camera, switch off in order not to drain the battery unnecessarily.
Cleaning and Storing
• Clean the housing of the camera head with a dry or if necessary with a moistened cloth. Wipe the lens of the camera head with a
lint-free cloth to keep the glass clean and grease-free. Do not use aggressive chemicals or abrasive for cleaning.
• If the swan neck was inserted into liquids, clean it after each use and dry thoroughly.
• Protect the inspection camera from dust and dirt and store it in the delivered carrying bag.
• If you do not use the inspection camera for long period of time, remove the battery. Leaking batteries can cause damage to the
electronic circuits.
Technical Data
Monitor
2.4” TFT (6.1 cm)
Resolution
320 x 234 Pixel
Camera Illumination
4 LEDs white
Power Supply
9 V Battery 6LR61
Max. Operating Time will fully charged Battery Approx. 1 Hour
Total Length of Inspection Camera
1000 mm
Immersion Duration of the Swan neck
Max. 1 Hour
Mind. Bending Radius of the Swan neck
10 mm
Camera Head Diameter
5,5 mm
Safety Class
IP 67
Field of View
109°
Focal Length
8 - 50 mm
Operation Temperature
0°C - 45°C
Storing Temperature
0°C – 60°C without Battery
Dimensions
215 x 156 x 80 mm
Disposal
Dear Customer, Please help avoid waste materials. If you at some point intend o dispose of this article, then please keep
in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the
rubbish bin, but check with your local council for recycling facilities in your area.
