SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Strasse 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid / Germany
E-Mail: [email protected]
12
Safety Notes
Please note the following safety notes to avoid malfunctions,
damage or physical injury:
Please read this manual first before using the trouble code reader!
Make sure the vehicle is OBD II compliant.
Only connect the trouble code reader to the vehicle with ignition off.
Perform emission inspections in well-ventilated work area or perform
such inspections only outdoors. There is risk of poisoning!
Keep clothing, hair, hands, tools and the trouble code reader away
from all moving or hot engine parts. Do not conduct the line cord over
sharp edges and corners or hot surfaces.
Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create
hazardous voltages when the engine is running. There is danger of
life!
Put transmission in PARK (for automatic transmission) or NEUTRAL
(for manual transmission) and make sure the parking break is
engaged.
Do not continue to use the trouble code reader if the unit or the line
cord are damaged. Repair work must be done by a qualified service
technician.
Keep the code reader dry, clean and free from oil, water and grease.
Do not disassemble the unit or attempt to repair it yourself. It does not
contain parts serviceable by you. In the case of questions or
problems, turn to our customer support.
