SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
Leverkuser Straße 65
Fax +49 (0) 2191 / 46438-40
D-42897 Remscheid
E-Mail: [email protected]
26028L
Tool to hold (lock) of the crankshaft, use as OEM T10225.
Remove cover of the pump wheel and loosen
the nut with a special wrench, with tool 3 and
a suitable wrench, you can prevent that crankshaft
twisted when impeller be solved.
Impeller puller, use as OEM T10221A.
Set the puller to the pump gear and pull out pump
by turning the spindle.
Pump puller, use as OEM T10222A
Remove fixing screws of the pump.
Put the tool 2, turn the 6-point until the puller
touched the engine block, as shown in the picture.
Now the water pump can be pulled out.
