www.swstahl.de
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: [email protected]
BEDIEUNUNGSANLEITUNG
/ INSTRUCTION
MANUAL
72351L
Measuring value
•
The main scale (3) is for reading off the value of a millimeter before the decimal
point (top line on the scale) and possibly 5-tenth value (lower on the scale).
•
On this value counts the value of the decimal scale drum.
•
So for example, as shown in the figure shows on the main scale reading of 5.5
mm, 0.29 mm on the scale drum, the workpiece is measured a thickness of 5.79
mm.
•
The lock can be clamp, if necessary, the measuring spindle. So the measured
value remains on the scale.
1 = Measuring spindle
2 = Adjustment
3 = Main Scale
4 = Scale drum
5 = Ratchet
6 = Clamp
7 = Heat protection
