SVT 5100, Руководство пользователя

Страница: 6 / 8

-5-
In the setting mode:
Press * 1 (Yellow light blinks), and then enter 2-digit number from
01 to 99 (Bi- is heard, and yellow light stops blinking). This 2-digit
number is the unlocking time. For example, enter 05 means the
unlocking time is 5 seconds.
Press # to exit the setting mode.
Set the unlocking time
Add fingerprint
In the setting mode:
Press 000-899 (Yellow light blinks. If red light is on, it indicates the
position is occupied. Press * twice to delete the information in this
position and then add the fingerprint. If green light is on, it
indicates the position is vacant. Fingerprint can be added. ) + put
the finger on the scanner until a Bi sound is heard. Then another
Bi and Bi-will be heard. It indicates the addition is successful.
If BiBiBi are heard, it indicates the addition fails. If BiBiBiBi are
heard, it indicates the fingerprint exists.
Press # to exit the setting mode.
Notice: Maximum 900 fingerprints.
In the setting mode:
Delete one fingerprint: press 000-899, then press * twice to delete
the fingerprint in 000-899. If light turns green means the deletion
is successful.
Delete all fingerprint: press * 8 (Yellow light blinks), and then
enter 8 twice (A continuous Bi - will be heard). The deletion is
successful.
Press # to exit the setting mode.
Delete the fingerprint
In the setting mode:
Press * 5 ( Yellow light blinks ), and then enter security level
number twice ( Parameter range is 1, 2, 3, 4, 5. The higher
number indicates the higher accuracy of fingerprint recognition).
If Bi- is heard, it indicates the setting is successful. If Bi Bi Bi are
heard, it indicates the setting fails.
Press # to exit the setting mode.
Set security level