-4-
OPERATION
SVT-3100 ACCESS
CONTROL CARD READER
require
s
the SVT Remote
control for programming.
In the setting mode:
Press 8 with a Di sound, then enter new 4-digits code (XXXX)
and #. After a Di sound, re-enter the new 4-digit code and #.
If two Di sounds is heard, it means the modification is successful.
If enter different codes twice, continued Di... sound will be heard,
the modification of code fails. Please modify again.
Press * to return to standby mode.
Notice: If forget admin code, turn on the power again and press #
in 3 seconds until Bi is heard. It means admin code is
restored successfully as default setting.
Press * and #, then enter XXXX (4-digits admin code) and #. A Di
sound indicates entering to the setting mode successfully.
Press * to return to standby mode. (No operation in 20 seconds
will return automatically). The factory default code is 4567.
Enter the setting mode
Modify access control code
Set master card
In the setting mode:
Press 0, a Di sound heard, and press 7 to hear another Di sound.
Then enter the last 6-digits master card number or swipe the
master card. After a Di sound, the setting is completed.
Press * to return to setting mode, and press * again to return to
standby mode.