-4-
A. When ZONE 1 relay actived, door indicator will turn green.
B. When ZONE 2 relay actived,door indicator will turn red.
Enter the setting mode:
.
Press the button and (mode indicator will flash yellow), follow the button twice, (a
continuous beep will be heard and mode indicator will turn yellow), it indicates all user
cards and codes have been cleaned out successfully.
.
Press the button and (mode indicator will flash yellow), follow the button twice, (a
continuous beep will be heard and mode indicator will turn yellow), it indicates it restores
to factory defaults.
Press the button to quit the setting mode.
.
.
If do operation in a wrong way, it will imply as BI.BI. sounds. The device would turn back
without actions in 30s automatically accompany with BI.BI. sounds. If in the access mode
as card and password entry in, just did one of actions(input password or swipe or swipe
the card), it will turn back in 5s automatically accompany with BI.BI. sounds.
.
in 3s).
If forgot the password, shut off the power and press , then turn on the power After
BI--- sounds, the password default back as 12345.
(Notice:DH16A-20DT should be shut off first, the turn on power, then press the
After BI--- sounds, the password default back as 12345.
The built-in buzzer will sent a continuous beeping if the photoresistor sensor is directly
exposed into the light. The buzzer will off automatically in 60s, the light is no longer detected
by enter the admin code.
.
Enter the setting mode:
.
Press the button and (mode indicator will flash yellow) and input new 5-digital codes
XXXXX and repeat it once again.
Press the button to quit the setting mode.
Enter the setting mode:
Press the button and (mode indicator will flash yellow), then following enter the
.
and , a long beep will be heard whilst the mode indicator will turn yellow, pickproof alarm
is turned off.
Press the button and (mode indicator will flash yellow), then following enter the
and , a long beep will be heard whilst the mode indicator will turn yellow, pickproof alarm
is turned on.
Press the button to quit the setting mode.
.
.
Enter the setting mode:
Press the button and (mode indicator will flash yellow), then following enter the
and , a long beep will be heard whilst the mode indicator will turn yellow, the function
of door bell is turned off.
.
Press the button and (mode indicator will flash yellow), then following enter the
.
and , a long beep will be heard whilst the mode indicator will turn yellow, the function
of door bell is turned on.
Press the button to quit the setting mode.
.
.
.
.
The relay in ZONE 2 for door bell is available if the function of door bell is turned on but
the function of door lock is not available. Press the button in standby mode, the relay
contacts one time, the door bell ringing is triggered.
.
Содержание 1100
Страница 7: ......
