Default username and password:
Username: admin
Password: password
Configuring the NVR
Once the NVR is discovered, double-click on of the names to bring up its settings page. On the basic
settings tab, you can assign its output and record stream numbers, change its IP configuration, enable a
dual-sync recording (N-2000 and V-Series) and enable/disable audio. You will need to complete this
process for all four DVR’s that appear in your control software.
While the four NVR heads require individual IP addresses for playback and recording purposes, overall
system management can be done by utilizing any of the four IP addresses. You can enter any one of the
NVR’s IP addresses into a web browser (or click the button with its IP address on the settings page
pictured below) to access recordings and other features covered later in this manual for all four
recording/playback heads.
On the Advanced Settings tab,
you can perform master delete
commands, reset to factory
defaults, or reboot the unit.
