1.
To enter pairing mode, tap the Bluetooth Setup button on
the rear panel or press and hold the Bluetooth button on the
remote for 3 seconds. Pairing Mode is indicated by the flashing
blue light on the rear panel
12
.
Setting Up and Streaming with Bluetooth
2.
Select “SVS Pro SoundBase” in the Bluetooth Settings menu on your smartphone,
tablet, or Computer.
3.
When Bluetooth is connected, the blue light on the rear of the product will stop
flashing and remain solid. Select Bluetooth as your source on the SoundBase,
select the music you want to stream and then press play!
Six presets are available for instant access to your favorite streaming music channels, playlists, and other content.
1.
From the Play-Fi app, start the station, playlist, or other streaming source you want to save as a preset.
2.
Press and hold the desired preset button (1 - 6) on the front panel or the remote control until the OLED display flashes “Saving
Preset #” and the preset button flashes. The Preset is confirmed when display shows “Preset # Saved” .
3.
Access your favorite music by selecting a saved preset at any time on the front panel or from the remote control.
To reset a preset, repeat the steps 1 and 2.
NOTE: Some premium subscription services may require that you sign in and enter a code the first time you set a preset with that service - The Play-Fi app will walk you through this process.
Create Custom Presets
Current services available as presets within the Play-fi app. More options coming soon, check
svsound.com/products/prime-wireless-pro-soundbase
for updates.
Android, Google Play, and Chromecast built-in are trademarks of Google LLC.
To stream audio from an iOS device to your SVS Prime Wireless Pro SoundBase,
it must first be set up on your Wi-Fi network (see section 3). Once the SoundBase
is on your network, any app or operating system that has AirPlay audio output
controls will automatically discover the SoundBase and add it to the list of
available AirPlay devices. It will have the same name it has in the Play-Fi app.
1.
Open the app you want to stream from.
2.
Start the audio you want to play.
3.
From the Control Center on your iOS device, or within the
active app, choose your SVS Prime Wireless Pro SoundBase
as the output device.
To cast audio from Chromecast-enabled apps to your SVS Prime Wireless Pro
SoundBase, it must first be set up on your Wi-Fi networks (see section 3).
1.
Open any Chromecast-enabled app you want to stream from.
2.
Start the audio you want to play.
3. In the top right corner, tap the Cast button.
4.
Choose your SoundBase. The Cast button will change colors,
letting you know you’re connected.
5. Once you are connected, you can stream audio directly to
your SoundBase via Chromecast built-in.
11
44
22
55
33
66
Setting up with an Android Device
Streaming with Apple AirPlay
Streaming with Chromecast built-in
You’re ready to stream!
Open the Play-Fi App and follow
prompts in the app to finish setting up
your Prime Wireless Pro SoundBase on
your home Wi-Fi network.
Now that your SVS Prime Wireless Pro Soundbase is set up over
Wi-Fi, you can access music from your devices and your favorite
streaming services. You can also enjoy Hi-Res Critical Listening
Mode, create a multi-room audio system, and more.
Note: The Play-Fi app might require an update to the SoundBase software upon first connection to enable
the latest features. The app will provide a notification if this occurs - this process can take 3-5 minutes.
If your SVS Prime Wireless Pro SoundBase is not discovered by the Wi-Fi network, try moving it closer to
your router or to a stronger signal area.
Open the Play-Fi app
and run through the
Setup Guide
Enter your WIFI
password
Open the WIFI
Settings of your
device and connect to
the Play-Fi Device
Press Setup to
confirm and
complete the setup
process
Return to the Play-Fi
app and connect to
your WIFI Network
Select a name for
your SoundBase and
you are ready to go
Once powered on, the Prime Wireless Pro SoundBase will go through
its startup process. After about 30 seconds, the green Wi-Fi light (on
the back of the product) will flash with a slow pulse, indicating the
device is ready to connect to your network. You can now proceed to
the next step.
Plug in your SoundBase
Search “Play-Fi” in the app store and download the free DTS Play-Fi
app to your phone or tablet to unlock the full functionality of your
SVS Prime Wireless Pro SoundBase.
Download DTS Play-Fi App
Setting Up Wi-Fi and the DTS Play-Fi App
11
44
22
33
Select the Play-Fi Device
Choose your Wi-Fi network
and name your device
The “Speaker Password” is not
required
AirPlay setup will configure
your Play-Fi Device for your
network
AirPlay Setup is complete
iOS users
Go to “Settings” -> “Wi-Fi” and select
Play-Fi Device listed under “SET UP NEW AIRPLAY
SPEAKER” on the lower portion of the screen
(you may need to wait up to 1 minute for the
speaker to appear). After selecting your Play-Fi
device, confirm the desired network, and enter the desired name for
your SoundBase (e.g. SoundBase Lounge). You will get a confirmation
screen when completed.
Note that AirPlay setup requires iOS 11.4 or later. If you are using an older version of iOS go to step 4.
Android users
skip to step 3B.
Setting up with an Apple Device
Batteries for
Remote
Remote
Control
Power
Cord
Included Accessories