SVS-Vistek EXO Series страница 131 Скачать руководство пользователя

Страница: 131 / 144

SVS-VISTEK–Terms of warranty EXO4000*U3

131

Terms of warranty

Standard Products Warranty and
Adjustment

Seller warrants that the article to be delivered under this order will be free from

defects in material and workmanship under normal use and service for a period

of 2 years from date of shipment. The liability of Seller under this warranty is

limited solely to replacing or repairing or issuing credit (at the discretion of Seller)

for such products that become defective during the warranty period. In order to

permit Seller to properly administer this warranty, Buyer shall notify Seller promptly

in writing of any claims,; provide Seller with an opportunity to inspect and test the

products claimed to be detective. Such inspection may be on customer’s premises

or Seller may request return of such products at customer’s expense. Such expense

will subsequently be reimbursed to customer if the product is found to be defective

and Buyer shall not return any product without prior return authorization from

Seller. If a returned product is found to be out of warranty or found to be within

the applicable specification, Buyer will have to pay an evaluation and handling

charge, independent of possible repair and/or replacement costs. Seller will notify

Buyer of the amount of said evaluation and handling charges at the time the

return authorization is issued. Seller will inform Buyer of related repair and/or

replacement costs and request authorization before incurring such costs. Buyer

shall identify all returned material with Sellers invoice number, under which

material has been received. If more than one invoice applies, material has to be

clearly segregated and identified by applicable invoice numbers. Adjustment is

contingent upon Sellers examination of product, disclosing that apparent defects

have not been caused by misuse, abuse, improper installation of application,

repair, alteration, accident or negligence in use, storage, transportation or

handling. In no event shall Seller be liable to Buyer for loss of profits, loss of use,

or damages of any kind based upon a claim for breach of warranty.

Development Product Warranty

Developmental products of Seller are warranted to be free from defects in

materials and workmanship and to meet the applicable preliminary specification

only at the time of receipt by Buyer and for no longer period of time in all other

respects the warranties made above apply to development products. The

aforementioned provisions do not extend the original warranty period of any

article which has been repaired or replaced by Seller.

Do not break Warranty Label

If warranty label of camera is broken warranty is void.
Seller makes no other warranties express or implied, and specifically, seller makes

no warranty of merchantability of fitness for particular purpose.

What to do in case of
Malfunction

Please contact your local distributor first.

Содержание EXO Series

















































































































































Результаты поиска

Содержание EXO Series

Отзывы:

Похожие инструкции для EXO Series

Бренды по названию

Популярные бренды

SVS-Vistek EXO Series, Руководство пользователя

Результаты поиска

Содержание EXO Series

Отзывы:

Похожие инструкции для EXO Series

Бренды по названию

Популярные бренды