SVS-Vistek EC02 Series, Руководство пользователя, Страница: 48 / 131

SVS-VISTEK
Feature-Set 48
Camera output
format Tap
geometry
1X–1Y Single tap
1X–2YE Dual tap
2X–1Y Dual tap
2X–2YE Four tap
Figure 40: table of tap
geometry/configurations
7.2 Camera Features
7.2.1 Tap geometries
Similar to other sensor readout technologies Camera Link is sending
many pixel values in parallel at the same time. The image can be split in
“taps” or “channels” which can be sent in parallel. The tap geometry is
describing how many taps are read and how they are transmitted through
the Camera Link interface.
The maximum camera speed is limited by the tap configuration being
used.
7.2.2 Standard Tap Geometries
Similar to other sensor readout technologies Camera Link is sending
many pixel values in parallel at the same time. The image can be split in
“taps” or “channels” which can be sent in parallel. The tap geometry is
describing how many taps are read and how they are transmitted through
the Camera Link interface.
Camera
Tap Tap
Maximum
speed
CL type
config geometry
SHR47 2T8 1X2_1Y 3,5 Base
4T8 1X2_2YE 7 Medium
7.2.3 Tap Structure
Your camera may be equipped with a two, four or even higher taped
sensor.
Tap configuration
For information according to your sensor refer to specifications .
Figure 41: Illustrations of the nomenclature used in specifications
Table 1: recommended tap
configurations