2.
Format the MicroSD card.
To activate the webcam function, press
button during the mass storage function and
the camera can be functioned as a webcam. Press
button again to switch back to
mass storage from webcam mode.
Note:
If you cannot find either mode, you can unplug the cable from PC and turn the
camera on and off once and connect the PC again.
5.2 Run the Software
1.
Insert a MicroSD card with at least 10MB free space into your camera.
2.
Connect your camera to a PC via the USB cable included.
3. Press button to turn the camera
4.
Open the MicroSD card folder inside file manager and you will find the file
“setting_win.exe” and “setting_mac.app). Click the correct file base on the operating
system you are using
Through the software, you can change the camera general setting
1. TV
type
2. Frequency
3.
Auto power off,
4. Auto
rotation,
5.
Set date and time.
6. Software
language
7. Photo
resolution
8. Photo
mode
Notes
：
If you cannot find setting files at your MicroSD folder, you can unplug the cable from
PC and turn the camera on and off once and connect the PC again.
5.3 Connecting Your Camera to a TV/HDTV
You can connect your camera to a TV or HDTV via the HDMI cable (not included). Once
you are connected you can:
1.
Take photos or videos by using your TV as a viewfinder
2.
Playback any photo or video files saved in the camera
3.
Delete any files saved in the camera
4.
Format the MicroSD Card
5.
Change your camera settings
6. Mounting Your Camera
Series versatile mount system allows you to attach the AC500E to any type of
helmet (bike, motorcycle, ski, skydive etc.), pole, board (surf, skate, ski etc) and handlebar
(bike and motorcycle).
6.1 Secure Strap
1.
Loop one end of the secure strap through the strap hole of the camera. You may use
a pin to help thread it thru the hole.
2.
Attach other half to the mount or other secure place
3.
Clip both ends together when camera is mounted.
6.2 Fix the CamLocker
1.
Fit the screw of the CamLocker to the tripod socket of the camera.
2.
Screw the CamLocker until it is tightened on the camera.
6.3 Mounting on the Handlebar or Pole
1.
Loosen both bike mount screws.
2.
Attach the bike mount to the handlebar or pole and tighten the screws until the mount
is firmly secured.
3.
Loosen and detach the ball joint nut from the bike mount.
4.
Insert the ball joint into the CamLocker Socket and tighten the nut.
5.
Attach the CamLocker and camera into the CamLocker socket. Assure that the
CamLocker nut is tightened securely.
6.
The ball joint system allows you to change the angle of the camera. Simply loosen the
nut, adjust the camera angle and re-tighten the nut.
7. Troubleshooting
Problems
Causes
Solutions
1. LED flashes and
camera turns off
2. Cannot turn on the
camera
Battery is depleted
Recharge the camera
Red LED flashes during
recording
Low battery
Recharge the camera
Cannot take photos or
video (Green LED
flashes)
Memory full
Replace with a memory card
with space available for
contents
Cannot take photos or
video (Green and Red
LED flashes
alternatively)
1. MicroSD card is not
inserted
2. MicroSD card has not
been formatted
properly.
1. Insert a SD card
2. Format the MicroSD card at
PC or TV
Cannot find removable
disk after connecting the
camera to the computer.
Connection failure.
1. Make sure all cable
connections are secured
and restart the computer if
necessary.
2. Try a different USB port.
8. Specification
Sensor
5 Mega pixel CMOS sensor
Lens
120º ultra wide angle field of view
Focus range
0.5m -
∞
Video
1080p :1920x1080
pixels
(16:9),
30
fps
720p:
1280x720
pixels
(16:9),
30
fps
Format: H.264 compression, saved as MPEG4 (.mov) file
Photo
16.0 Mega Pixel
s:(4608x3456)
5.0 Mega Pixel
s: (2592x1944)
3.0 Mega Pixe
ls: (2048x1536)
Format:
JPEG
Capture Modes: Single photo, Burst mode, Time lapse
Audio
Built-in high quality microphone
ADPCM Compression, Automatic Gain Control
Storage
MicroSD/MicroSDHC with minimum Class 6 (not included)
Average Recording Times: about 6 hours (using 32GB mSD
card in 1080p/30)
Connection
USB2.0 (for data connection and battery charging)
HDMI
Power
Build-in 1050 mAH Rechargeable Li-ion Battery
Battery Life: Approx. 3 hrs
Housing
Durable plastic and fashionable finishing
Depth up to 30 feet / 10 meters
Dimension 96.3mmX40mmX45.8mm
Weight 112.5g
* If you cannot play the file format by existing media player, please download QuickTime Player
and try again.
9. System Requirements
Operating system
Windows® 7/XP SP3 /Vista and Mac 10.5 or above
CPU
Pentium III or above
RAM
At least 64MB
Interface USB
port
CD
4x speed CD ROM or above
10. Trademark Information
Microsoft
®
and Windows
®
are U.S. registered trademarks of Microsoft Corporation.
Pentium
®
is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Inc.
MicroSD
TM
is a trademark.
Other names and products may be trademarks or registered trademarks of their
respective owners.
IMPORTANT
•
Keep the lens clean. Dirt and fingerprints will affect the quality of the
picture.
•
Close the Back Cover properly for best water sealing. Do not open it
under water.
•
Rinse the camera with clean water after used and keep it dry for storage.
•
You can refer to the detail operation instruction at the user manual
For EU only
AM-SVP-AC5E-1
