5
Technical data with dimension sketch for 2-wheel trolley -24
WLL (Working Load Limit) 0,5 ton
For I-beams width 50 – 160 mm
Minimum curve radius 0,75 m
Safety instructions
•
Check the function of the trolley before use.
•
Check that the beam has sufficient permissible load and is securely anchored.
•
Do not overload the trolley!
•
No person under hanging load!
•
Be careful with the trolley. Do not push away the trolley with high speed along the beam.
•
The trolley must not be used for lifting or transporting people.
•
Don not leave a hanging load unattended. (Lifting device may be hanging in the trolley.)
•
Check the installation regularly.
Regular control
Regular controls of lifting devices are normally carried out yearly. When necessary (e.g. high
frequency in use) controls are more often carried out. It is advisable to inspect the trolleys at the
same time. If a hand chain of a trolley -21 has been damaged it should be replaced with a new one.
If any of the wheels do not run properly, has been damaged or is warped the trolley must be
repaired or replaced. The trolley might have been overloaded and a trolley with higher WLL
(working load limit) might be needed.
Repair
Only SVERO original parts must be chosen when damaged parts have to be replaced.
Order through your dealer.
EC DECLARATION OF CONFORMITY
SVERO LIFTING AB
Alfavägen 4, S-556 52 Jönköping,
declares that above SVERO trolley models -20, -21, -24 have been manufactured in conformity
with the requirements of the EC Machinery Directive
2006/42/EG.
NB 2011-03-31
